#1 2019-10-10 09:49:50

marcinw
Member
Registered: 2019-10-10

[ReportServer 3.1.0] Problem with exporting in OLAP cubes

Hi,
I work with Patryx in the same project with ReportServer.

My problem occurs while exporting dynamic report in cube mode (EXCEL, CSV, PDF, HTML, etc). It happens after run query on prepared cube, after changing parameters (parameters tab).
It works if didn't change parameters, but after change parameters I run query (without reverting cube) and there are valid results, but export shows only sum of measure.

Screens are attached below.
2019-10-10-113250.png
2019-10-10-113319.png
2019-10-10-113359.png
2019-10-10-113443.png
darmowe serwery

Last edited by marcinw (2019-10-10 09:50:58)

Offline

#2 2019-10-15 09:46:55

eduardo
Administrator
Registered: 2016-11-01
Website

Re: [ReportServer 3.1.0] Problem with exporting in OLAP cubes

For completeness:

marcinw wrote:

It happens in every dynamic report with parameters in Pivot mode.
After changing parameters value when You will try to export (EXCEL, HTML, any type) an error will occur.

I made the test on your DEMO enviroment. Result is the same, after changing parameters, an error occurs when I try to export.
Scenario:
1. Execute dynamic report (i.e. T_AGG_ORDER)
2. Configure list of columns (one of them has aggregate)
3. Activate pivot
4. Change parameters value (i.e. date from)
5. Run Pivot/Preview with chosen measures and rows
6. Export (i.e. to EXCEL) - IT WORKS OK
7. Change parameters value (i.e. date from)
8. Re-Run Pivot/Preview
9. Export (i.e. to EXCEL) - ERROR


2019-10-15-104451.png
2019-10-15-104512.png
2019-10-15-104535.png
2019-10-15-104544.png
2019-10-15-104722.png
2019-10-15-104737.png
2019-10-15-104745.png
2019-10-15-105302.png
2019-10-15-105309.png
2019-10-15-105314.png

Offline

Board footer

Powered by FluxBB